Who is allowed to work on my boiler and gas appliances?
How the Gas Safety Regulations 1998 work, how to check a Gas Safe engineer's ID card and licence, and which heating jobs are water-side, not gas.
Emir Handyman fits and upgrades central heating across Thurrock, south Essex and east London: new and replacement radiators, thermostatic radiator valves, heating controls and system upgrades. By law, anyone paid to work on a boiler or gas supply must be Gas Safe registered, so mention any gas work in your message.
Emir’s own workEmir's own posts on this page include a boiler service and clean-out, and a central heating flush.
Real central heating work, from photos Emir posted on his Facebook page. Tap to enlarge.
Under the Gas Safety (Installation and Use) Regulations 1998, anyone who works on gas appliances or fittings as a business must be on the Gas Safe Register. You can check an engineer's registration at gassaferegister.co.uk.
Swapping a radiator for one the same size is usually straightforward. A bigger radiator, or one in a new position, can mean new pipework, so say what you want in your message.
Radiators that are cold at the bottom often point to sludge in the system, which a flush can clear. Send a photo of the radiator and the boiler with your message.
Photograph the job from a few angles and send it to 07950 606 931 with your postcode.
Emir replies with a price from the photos, or arranges a visit to measure up for bigger jobs.
Agree a date that works for you. There’s no obligation until you say yes.
Yes. Emir Handyman replaces radiators and fits new ones, along with thermostatic radiator valves and heating controls. Swapping a radiator for the same size is the simplest job; a larger radiator or a new position may need pipework changes. Send photos and the radiator sizes on WhatsApp.
In Great Britain anyone who works on a gas boiler or other gas appliance as a business must be on the Gas Safe Register, under the Gas Safety (Installation and Use) Regulations 1998. Ask to see the engineer's Gas Safe ID card: the back lists the types of gas work they are qualified to do.
Radiators that are cold at the bottom usually have sludge, a mix of rust and debris, sitting in them and blocking the flow of hot water. A central heating flush can clear it. Radiators that are cold at the top usually just need bleeding to let trapped air out.
The rules mentioned here are explained, with official sources, in the guide Who is allowed to work on my boiler and gas appliances?
How the Gas Safety Regulations 1998 work, how to check a Gas Safe engineer's ID card and licence, and which heating jobs are water-side, not gas.
A practical checklist for landlords in England: annual gas check, EICR every 5 years, smoke and CO alarms, legionella, EPC and Renters' Rights Act.
Send Emir a WhatsApp with a few photos of the job and your postcode. The estimate for central heating is free, with no obligation.